# packages

pkgId: 974fc90dc6c3d96872092662bea5b9f19fd950c4
name: asterisk
arch: x86_64
version: 1.4.44
epoch: 0
release: 7.0.centos5
summary: Asterisk PBX
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: vmcentos5_64
rpm_sourcerpm: asterisk-1.4.44-7.0.centos5.src.rpm
location_href: asterisk-1.4.44-7.0.centos5.x86_64.rpm
checksum_type: sha
description:
  Asterisk is an Open Source PBX and telephony development platform that
  can both replace a conventional PBX and act as a platform for developing
  custom telephony applications for delivering dynamic content over a
  telephone similarly to how one can deliver dynamic content through a
  web browser using CGI and a web server.

  Asterisk talks to a variety of telephony hardware including BRI, PRI,
  POTS, and IP telephony clients using the Inter-Asterisk eXchange
  protocol (e.g. gnophone or miniphone). For more information and a
  current list of supported hardware, see www.asterisk.org.


pkgId: e8d23a1f62ceb154c01d8f2b3377ed6ba461b086
name: asterisk-addons
arch: x86_64
version: 1.4.13
epoch: 0
release: 1.0.centos5
summary: Additional addons for Asterisk
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: asterisk-addons-1.4.13-1.0.centos5.src.rpm
location_href: asterisk-addons-1.4.13-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  Asterisk is a complete PBX in software. It runs on Linux and
  provides all of the features you would expect from a PBX and more.
  Asterisk does voice over IP in three protocols, and can
  interoperate with almost all standards-based telephony equipment
  using relatively inexpensive hardware. This package contains
  additional addons for asterisk.


pkgId: a08ca7c161d41206f03397d5484423f4b4b23cc2
name: asterisk-addons-chan_ooh323
arch: x86_64
version: 1.4.13
epoch: 0
release: 1.0.centos5
summary: Objective Systems driver for supporting H323 on Asterisk PBX
url: http://www.asterisk.org/
rpm_license: GPL
rpm_vendor: Objective Systems
rpm_group: System/Servers
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: asterisk-addons-1.4.13-1.0.centos5.src.rpm
location_href: asterisk-addons-chan_ooh323-1.4.13-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package contains a driver which will enable ooh323c, a C based open source
  H.323 stack from Objective Systems(www.obj-sys.com/open), to be used with
  asterisk


pkgId: a4ebc398a518163a9e2aa88518013d6d667c5e59
name: asterisk-addons-debuginfo
arch: x86_64
version: 1.4.13
epoch: 0
release: 1.0.centos5
summary: Debug information for package asterisk-addons
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: Development/Debug
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: asterisk-addons-1.4.13-1.0.centos5.src.rpm
location_href: asterisk-addons-debuginfo-1.4.13-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package provides debug information for package asterisk-addons.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 6773ed2779293061ecd2b9784c22e40dcc45a2e7
name: asterisk-addons-plugins-mysql
arch: x86_64
version: 1.4.13
epoch: 0
release: 1.0.centos5
summary: MySQL plugins for Asterisk
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: asterisk-addons-1.4.13-1.0.centos5.src.rpm
location_href: asterisk-addons-plugins-mysql-1.4.13-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package contains MySQL plugins for Asterisk:
  * app_sql_mysql.so: Simple MySQL Interface
  * cdr_mysql.so: Call Detail Recording (CDR) for MySQL
  * res_config_mysql.so: MySQL Realtime Configuration


pkgId: e27088cc247756fd5010879d9b471a683823afe4
name: asterisk-agx-addons-debuginfo
arch: x86_64
version: trunk_r67
epoch: 1
release: 1.0.centos5
summary: Debug information for package asterisk-agx-addons
url: https://sourceforge.net/projects/agx-ast-addons/
rpm_license: GPL
rpm_group: Development/Debug
rpm_buildhost: vmcentos_x8664
rpm_sourcerpm: asterisk-agx-addons-trunk_r67-1.0.centos5.src.rpm
location_href: asterisk-agx-addons-debuginfo-trunk_r67-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package provides debug information for package asterisk-agx-addons.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 35818f0f957af10210b9f71e87869a205c464015
name: asterisk-agx-addons
arch: x86_64
version: trunk_r67
epoch: 1
release: 1.0.centos5
summary: AGX Addons for Asterisk
url: https://sourceforge.net/projects/agx-ast-addons/
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: vmcentos_x8664
rpm_sourcerpm: asterisk-agx-addons-trunk_r67-1.0.centos5.src.rpm
location_href: asterisk-agx-addons-trunk_r67-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  Asterisk is a widely extendible Open Source PBX and telephony development platform.
  This package contains additional modules for Asterisk which are, for one reason
  or another, not included in the normal base distribution.  Many of these
  modules are experimental or have a GPL license without a disclaimer that allow
  digium to insert them into the official distribution (double licensed).
  additional addons for asterisk.

  CREDITS: Original Author
  =========================
  app_confcall.c			- Anthony Minessale II
  app_devstate.c			- Druid Software
  app_nv_backgrounddetect.c	- Newman Telecom
  app_nv_faxdetect.c		- Newman Telecom
  app_pickup2.c			- Florian Overkamp
  app_txfax.c, app_rxfax.c	- Hacked by me
  func_devstate.c			- http://svncommunity.digium.com/svn/russell/asterisk-1.4/func_devstate-1.4/func_devstate.c


pkgId: 3ccbb3a34a9ebf1bb1169b474d55c53192a51bc9
name: asterisk-chan_h323
arch: x86_64
version: 1.4.44
epoch: 0
release: 7.0.centos5
summary: This module adds H323 support to the Asterisk PBX
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: vmcentos5_64
rpm_sourcerpm: asterisk-1.4.44-7.0.centos5.src.rpm
location_href: asterisk-chan_h323-1.4.44-7.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This module provides chan_h323 in a separate package with its
  dependencies. In this way main asterisk package doesn't depend
  on h323 dependencies.


pkgId: 34e83d2416e6967020f678405f9405f80edca731
name: asterisk-core-sounds-en
arch: noarch
version: 1.4.20
epoch: 0
release: 1.0.centos5
summary: English sound files for the Asterisk PBX and telephony applications toolkit
url: http://www.asterisk.org/
rpm_license: BSD
rpm_group: System/Servers
rpm_buildhost: centos.ipcontact.com.uy
rpm_sourcerpm: asterisk-core-sounds-en-1.4.20-1.0.centos5.src.rpm
location_href: asterisk-core-sounds-en-1.4.20-1.0.centos5.noarch.rpm
checksum_type: sha
description:
  Asterisk is an Open Source PBX and telephony development platform that can both
  replace a conventional PBX and act as a platform for developing custom
  telephony applications for delivering dynamic content over a telephone
  similarly to how one can deliver dynamic content through a web browser using
  CGI and a web server.

  Asterisk talks to a variety of telephony hardware including BRI, PRI, POTS, and
  IP telephony clients using the Inter-Asterisk eXchange protocol (e.g. gnophone
  or miniphone).

  This package contains freely usable recorded sounds that were meant to be used
  with Asterisk in the following formats: a-Law, G.722, G.729, GSM, mu-Law, WAV


pkgId: 1161de3501d56ad4a9b305c49ef93dc1b1537341
name: asterisk-core-sounds-paola
arch: noarch
version: 1.4.2
epoch: 0
release: 1.0.centos5
summary: Spanish sounds files for the Asterisk PBX
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: vmcentos5_64
rpm_sourcerpm: asterisk-core-sounds-paola-1.4.2-1.0.centos5.src.rpm
location_href: asterisk-core-sounds-paola-1.4.2-1.0.centos5.noarch.rpm
checksum_type: sha
description:
  Asterisk is an Open Source PBX and telephony development platform that
  can both replace a conventional PBX and act as a platform for developing
  custom telephony applications

  This package include sound files needed to run asterisk in spanish language
  recorded with Paola Sciarra's voice.
  Includes digits, letters, voicemail dialogs and announces.


pkgId: 54c971b5ba6c497d0bec2b85133c4abf23dbef68
name: asterisk-core-sounds-pt_BR
arch: noarch
version: 1.4.1
epoch: 0
release: 1.0.centos5
summary: Portuguese of Brazil sounds for Asterisk PBX
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: centos.ipcontact.com.uy
rpm_sourcerpm: asterisk-core-sounds-pt_BR-1.4.1-1.0.centos5.src.rpm
location_href: asterisk-core-sounds-pt_BR-1.4.1-1.0.centos5.noarch.rpm
checksum_type: sha
description:
  Asterisk is an Open Source PBX and telephony development platform.
  This package include sound files needed to make asterisk speak in brazilian portuguese.
  Includes digits, letters, voicemail dialogs and announces.
  Recorded by Fast Solutions, Sao Paulo, Brazil.


pkgId: 47935c99cc0019e84fc81724f1406221a035e0b4
name: asterisk-debuginfo
arch: x86_64
version: 1.4.44
epoch: 0
release: 7.0.centos5
summary: Debug information for package asterisk
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: Development/Debug
rpm_buildhost: vmcentos5_64
rpm_sourcerpm: asterisk-1.4.44-7.0.centos5.src.rpm
location_href: asterisk-debuginfo-1.4.44-7.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package provides debug information for package asterisk.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 5477161ad443f589734d5137085aef161e0b9e73
name: asterisk-ipcontact-addons
arch: x86_64
version: 1.4.10_ast14
epoch: 0
release: 1.0.centos5
summary: IPContact modules for asterisk
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: asterisk-ipcontact-addons-1.4.10_ast14-1.0.centos5.src.rpm
location_href: asterisk-ipcontact-addons-1.4.10_ast14-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  Addon modules implementing IPContact extensions to Asterisk PBX, rewrited for 1.4.

  * IPContact Dial Logic System (app_dialipcontact.so):
  Es el modulo que centraliza la logica de discado (exceptuando las colas) de IPContact usando una base de datos MySQL.
  Registra las siguientes aplicaciones:
  == Registered application 'DialPSTN'
  == Registered application 'GotoDial'
  == Registered application 'SetCIDFromExten'
  == Registered application 'CallFwdOnBusy'

  * Set CallerID Name from ldap addressbook (app_ldapsetcid.so):

  Aplicacion que setea cel Caller ID de acuerdo a la info en ldap.
  Se dejo en un módulo separado ya que usa otro servicio (Openldap)
  == Registered application 'LDAPSetCID'

  * IPContact Initialization System (app_loadipcontact.so):
  On startup loads to the asterisk db the configuration parameters
  of the ipcontact system.
  Also implements many common ipcontact modules utility functions.
  == Registered application 'LoadIPContact'


pkgId: 171ea118a73e8debec50f286314f2d585b91791a
name: asterisk-ipcontact-addons-debuginfo
arch: x86_64
version: 1.4.10_ast14
epoch: 0
release: 1.0.centos5
summary: Debug information for package asterisk-ipcontact-addons
rpm_license: GPL
rpm_group: Development/Debug
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: asterisk-ipcontact-addons-1.4.10_ast14-1.0.centos5.src.rpm
location_href: asterisk-ipcontact-addons-debuginfo-1.4.10_ast14-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package provides debug information for package asterisk-ipcontact-addons.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 74f320e45e39361c74bc7213abfafc50ab460481
name: asterisk-ipp_codecs
arch: x86_64
version: 6.1.2.051_1.0_beta9.ast14
epoch: 0
release: 1.0.centos5
summary: Free Asterisk G729 G723 codecs based on Intel IPP
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: centos64
rpm_sourcerpm: asterisk-ipp_codecs-6.1.2.051_1.0_beta9.ast14-1.0.centos5.src.rpm
location_href: asterisk-ipp_codecs-6.1.2.051_1.0_beta9.ast14-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package provides Asterisk modules codec_g729.so and codec_g723.so.
  These modules let's Asterisk use the G.729 and G.723.1 protocols for
  voice compression when communicating with other devices.

  Based on Intel originally offered sample G.729 and G.723.1 implementation for Linux. Based on
  package from http://asterisk.hosting.lv


pkgId: 95eb27af340cfe6425fedec1a7a330c8c61341d4
name: asterisk-ipp_codecs-debuginfo
arch: x86_64
version: 6.1.2.051_1.0_beta9.ast14
epoch: 0
release: 1.0.centos5
summary: Debug information for package asterisk-ipp_codecs
rpm_license: GPL
rpm_group: Development/Debug
rpm_buildhost: centos64
rpm_sourcerpm: asterisk-ipp_codecs-6.1.2.051_1.0_beta9.ast14-1.0.centos5.src.rpm
location_href: asterisk-ipp_codecs-debuginfo-6.1.2.051_1.0_beta9.ast14-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package provides debug information for package asterisk-ipp_codecs.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 44512877f773ef80648e3341c8681fdd2801782a
name: asterisk-plugins-jabber
arch: x86_64
version: 1.4.44
epoch: 0
release: 7.0.centos5
summary: Jabber support for Asterisk
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: vmcentos5_64
rpm_sourcerpm: asterisk-1.4.44-7.0.centos5.src.rpm
location_href: asterisk-plugins-jabber-1.4.44-7.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package contains Jabber support for Asterisk.

  * res_jabber - A resource for interfacing asterisk directly as a client or a
                component to a jabber compliant server.

  * chan_gtalk - brief Gtalk Channel Driver, until google/libjingle works with
                jingle spec.


pkgId: a755112638a394438bd5fa3bd852de24995ce0d8
name: asterisk-plugins-odbc
arch: x86_64
version: 1.4.44
epoch: 0
release: 7.0.centos5
summary: ODBC plugins for Asterisk
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: vmcentos5_64
rpm_sourcerpm: asterisk-1.4.44-7.0.centos5.src.rpm
location_href: asterisk-plugins-odbc-1.4.44-7.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package contains ODBC plugins for Asterisk:

  * ODBC Configuration
  * Call Detail Recording for ODBC
  * ODBC resource manager


pkgId: a28fca5aa3263b2e86d489564adb43eeb58d4f18
name: asterisk-plugins-pgsql
arch: x86_64
version: 1.4.44
epoch: 0
release: 7.0.centos5
summary: PostgreSQL plugins for Asterisk
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: vmcentos5_64
rpm_sourcerpm: asterisk-1.4.44-7.0.centos5.src.rpm
location_href: asterisk-plugins-pgsql-1.4.44-7.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package contains PostgreSQL plugins for Asterisk:

  * Simple PostgreSQL Interface
  * Call Detail Recording for PostgreSQL


pkgId: dbc4c41275f21243f9d9ff9bba38de510cd7ab2a
name: asterisk-webvmail
arch: x86_64
version: 1.4.44
epoch: 0
release: 7.0.centos5
summary: Web frontend to voicemail
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: vmcentos5_64
rpm_sourcerpm: asterisk-1.4.44-7.0.centos5.src.rpm
location_href: asterisk-webvmail-1.4.44-7.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package contains the web frontend to voicemail.

  WARNING:
  IT USES A SETUID ROOT PERL SCRIPT, SO IF YOU DON'T LIKE THAT,
  DO NOT INSTALL THIS PACKAGE!


pkgId: 051813fa9a889a4f1b43ab156654fd504f77ca28
name: cacti-spine
arch: x86_64
version: 0.8.7e
epoch: 0
release: 2.el5
summary: Fast c-based poller for the cacti graphing solution
url: http://www.cacti.net/
rpm_license: LGPL
rpm_vendor: Dag Apt Repository, http://dag.wieers.com/apt/
rpm_group: Applications/System
rpm_buildhost: vmcentos_x8664
rpm_sourcerpm: cacti-spine-0.8.7e-2.el5.src.rpm
rpm_packager: Dag Wieers <dag@wieers.com>
location_href: cacti-spine-0.8.7e-2.el5.x86_64.rpm
checksum_type: sha
description:
  Spine is a supplemental poller for Cacti that makes use of pthreads
  to achieve excellent performance.


pkgId: de8307f8d2f237391201390481d07e7738913d11
name: dahdi-linux
arch: x86_64
version: 2.2.1
epoch: 0
release: 1.2.centos5
summary: Zapata Telephony Interface Library and tools
url: http://www.asterisk.org/
rpm_license: GPLv2
rpm_group: Applications/System
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: dahdi-linux-2.2.1-1.2.centos5.src.rpm
rpm_packager: IPContact Software <ipcontact@ipcontact.com.uy>
location_href: dahdi-linux-2.2.1-1.2.centos5.x86_64.rpm
checksum_type: sha
description:
  Tools, utilities and libraries for Zapata telephony interfaces

  The DAHDI Telephony Interface drivers is contained in the
  dkms-dahdi-linux package.


pkgId: 922b7379cf679c12b9687dbf5ae3365ba3c140d8
name: dahdi-linux-debuginfo
arch: x86_64
version: 2.2.1
epoch: 0
release: 1.2.centos5
summary: Debug information for package dahdi-linux
url: http://www.asterisk.org/
rpm_license: GPLv2
rpm_group: Development/Debug
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: dahdi-linux-2.2.1-1.2.centos5.src.rpm
rpm_packager: IPContact Software <ipcontact@ipcontact.com.uy>
location_href: dahdi-linux-debuginfo-2.2.1-1.2.centos5.x86_64.rpm
checksum_type: sha
description:
  This package provides debug information for package dahdi-linux.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 3d4d759a8c3e62689c570222ee8a460135cd28b2
name: dahdi-linux-devel
arch: x86_64
version: 2.2.1
epoch: 0
release: 1.2.centos5
summary: Development files for DAHDI telephony interfaces
url: http://www.asterisk.org/
rpm_license: GPLv2
rpm_group: Development/Libraries
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: dahdi-linux-2.2.1-1.2.centos5.src.rpm
rpm_packager: IPContact Software <ipcontact@ipcontact.com.uy>
location_href: dahdi-linux-devel-2.2.1-1.2.centos5.x86_64.rpm
checksum_type: sha
description:
  Development files for the Zapata Telephony Interface Library.
  This package contains the tonezone library and its header
  files.


pkgId: fcd0d4ba54bb3fde6b076c152917ce0319738286
name: dahdi-tools-debuginfo
arch: x86_64
version: 2.2.1
epoch: 0
release: 1.1.centos5
summary: Debug information for package dahdi-tools
url: http://www.asterisk.org/
rpm_license: GPLv2
rpm_group: Development/Debug
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: dahdi-tools-2.2.1-1.1.centos5.src.rpm
rpm_packager: IPContact Software <ipcontact@ipcontact.com.uy>
location_href: dahdi-tools-debuginfo-2.2.1-1.1.centos5.x86_64.rpm
checksum_type: sha
description:
  This package provides debug information for package dahdi-tools.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 5823cacb43372293e77e0c7b74f4c0a996f40284
name: dahdi-tools-devel
arch: x86_64
version: 2.2.1
epoch: 0
release: 1.1.centos5
summary: Development files for DAHDI telephony interfaces
url: http://www.asterisk.org/
rpm_license: GPLv2
rpm_group: Development/Libraries
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: dahdi-tools-2.2.1-1.1.centos5.src.rpm
rpm_packager: IPContact Software <ipcontact@ipcontact.com.uy>
location_href: dahdi-tools-devel-2.2.1-1.1.centos5.x86_64.rpm
checksum_type: sha
description:
  Development files for the DAHDI Telephony Interface Library.
  This package contains the tonezone library and its header
  files.


pkgId: 09071c4105d5b805df4f83e8ccf46a65ae3d8c36
name: dkms-dahdi-linux
arch: x86_64
version: 2.2.1
epoch: 0
release: 1.2.centos5
summary: Kernel drivers for the DAHDI Telephony Interface
url: http://www.asterisk.org/
rpm_license: GPLv2
rpm_group: System Environment/Kernel
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: dahdi-linux-2.2.1-1.2.centos5.src.rpm
rpm_packager: IPContact Software <ipcontact@ipcontact.com.uy>
location_href: dkms-dahdi-linux-2.2.1-1.2.centos5.x86_64.rpm
checksum_type: sha
description:
  Kernel drivers for DAHDI (DAHDI stands for Digium Asterisk Hardware Device Interface):

  Supported Hardware
  ------------------
  Digital Cards
  ~~~~~~~~~~~~~
  - wct4xxp:
    * Digium TE205P/TE207P/TE210P/TE212P: PCI dual-port T1/E1/J1
    * Digium TE405P/TE407P/TE410P/TE412P: PCI quad-port T1/E1/J1
    * Digium TE220: PCI-Express dual-port T1/E1/J1
    * Digium TE420: PCI-Express quad-port T1/E1/J1
  - wcte12xp:
    * Digium TE120P: PCI single-port T1/E1/J1
    * Digium TE121: PCI-Express single-port T1/E1/J1
    * Digium TE122: PCI single-port T1/E1/J1
  - wcte11xp:
    * Digium TE110P: PCI single-port T1/E1/J1
  - wct1xxp:
    * Digium T100P: PCI single-port T1
    * Digium E100P: PCI single-port E1

  - raven: E100P/T100P - PhonicEQ RAVEN T1 or E1/PRA card Driver

  - wcb4xxp:
    * Digium B410: PCI quad-port BRI
  - tor2: Tormenta quad-span T1/E1 card from the Zapata Telephony project

  - tor3: TE400P - PhonicEQ Tormenta 2 Quad E1/T1 PCI Driver



  Analog Cards
  ~~~~~~~~~~~~
  - wctdm24xxp:
    * Digium TDM2400P/AEX2400: up to 24 analog ports
    * Digium TDM800P/AEX800: up to 8 analog ports
    * Digium TDM410P/AEX410: up to 4 analog ports
  - wctdm:
    * Digium TDM400P: up to 4 analog ports
  - xpp: Xorcom Astribank: a USB connected unit of up to 32 ports
    (including the digital BRI and E1/T1 modules)
  - wcfxo: X100P, similar and clones. A simple single-port FXO card


  Other Drivers
  ~~~~~~~~~~~~~
  - pciradio: Zapata Telephony PCI Quad Radio Interface
  - wctc4xxp: Digium hardware transcoder cards (also need dahdi_transcode)
  - dahdi_dynamic_eth: TDM over Ethernet (TDMoE) driver. Requires dahdi_dynamic
  - dahdi_dynamic_loc: Mirror a local span. Requires dahdi_dynamic
  - dahdi_dummy: A dummy driver that only provides a DAHDI timing source.

  - dahdi_dynamic_ethmf - Redfone Multi-Span Ethernet Interface


  - ystdm8xx - Yeastar TDM800
  - ystdm16xx - Yeastar TDM1600


  - opvxa1200 - OpenVox A1200P


pkgId: 786fbcb987dba36a130df1c043b7162ff0486007
name: fxload
arch: x86_64
version: 2002_04_11
epoch: 0
release: 5xr
summary: EZ-USB utility program
url: http://linux-hotplug.sourceforge.net/
rpm_license: GPL
rpm_group: System/Kernel and hardware
rpm_buildhost: vmcentos_x8664
rpm_sourcerpm: fxload-2002_04_11-5xr.src.rpm
location_href: fxload-2002_04_11-5xr.x86_64.rpm
checksum_type: sha
description:
  This package contains utilities for downloading firmware to EZ-USB devices.
  EZ-USB devices use 8051-based microcontrollers that have been enhanced with
  registers, buffers, and other device-side support for USB transactions.

  It currently supports devices based on the Anchorchips EZ-USB, as well as the
  Cypress EZ-USB FX (which is almost completely source compatible) and EZ-USB FX2
  (which is not).  All of these support full speed (12 Mbit/sec) transfers.  The
  FX2 also supports high speed (480 Mbit/s) transfers, introduced in USB 2.0.

  This version of FXLOAD supports optional use of two-stage loading, where
  special device firmware is used to support writing into off-chip memory such
  as RAM (when firmware neeeds more than about 8 KBytes of code and data) or,
  for firmware development, I2C serial EEPROM.


pkgId: 34356ee6acfe5fdb917ac88301b0d7da97a9ab43
name: fxload-debuginfo
arch: x86_64
version: 2002_04_11
epoch: 0
release: 5xr
summary: Debug information for package fxload
url: http://linux-hotplug.sourceforge.net/
rpm_license: GPL
rpm_group: Development/Debug
rpm_buildhost: vmcentos_x8664
rpm_sourcerpm: fxload-2002_04_11-5xr.src.rpm
location_href: fxload-debuginfo-2002_04_11-5xr.x86_64.rpm
checksum_type: sha
description:
  This package provides debug information for package fxload.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 0addecd40e6b71d6ef0797444d3fdfba301821a4
name: gnugk
arch: x86_64
version: 2.2.8
epoch: 0
release: 1.0.centos5
summary: OpenH323 Gatekeeper - The GNU Gatekeeper
url: http://www.gnugk.org/
rpm_license: GPL+
rpm_group: System/Servers
rpm_buildhost: vmcentos_x8664
rpm_sourcerpm: gnugk-2.2.8-1.0.centos5.src.rpm
location_href: gnugk-2.2.8-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  The GNU Gatekeeper (GnuGk) is a full featured H.323 gatekeeper. It is
  based on the Open H.323 (H323plus) stack. Both components together
  form the basis for a free IP telephony system (VOIP).


pkgId: 7856ef9dd4b2fa68e59731ee3d23e9a9db409ad4
name: ipcontact-moh
arch: noarch
version: 1.4.0
epoch: 0
release: 1.1.centos5
summary: IPContact Music On Hold
url: http://ipcontact.com.uy
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: vmcentos-x8664
rpm_sourcerpm: ipcontact-moh-1.4.0-1.1.centos5.src.rpm
location_href: ipcontact-moh-1.4.0-1.1.centos5.noarch.rpm
checksum_type: sha
description:
  This package include music on hold files needed to run the IPContact
  system applicationson top of Asterisk PBX.


pkgId: 508098c5c22410e0d81c7bcf131dcb5722bf6ced
name: ipcontact-release
arch: noarch
version: 5
epoch: 0
release: 1.4.centos5
summary: IPContact repository release file and package configuration for CentOS 5
url: http://ipcontact.com.uy/pub/centos/5
rpm_license: GPL
rpm_vendor: IPContact Software
rpm_group: System Environment/Base
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: ipcontact-release-5-1.4.centos5.src.rpm
rpm_packager: Daniel Ferrer <daniel@ipcontact.com.uy>
location_href: ipcontact-release-5-1.4.centos5.noarch.rpm
checksum_type: sha
description:
  IPContact release file. This package contains yum configuration
  for the IPContact RPM repository for Centos, as well as the public
  GPG keys used to sign them.


pkgId: ff02c728795a9194574a6c000379822c6f06d71d
name: ipcontact-sounds-paola
arch: noarch
version: 1.0.5
epoch: 0
release: 1.0.centos5
summary: IPContact Asterisk PBX sounds
url: http://ipcontact.com.uy
rpm_license: GPL
rpm_group: System/Servers
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: ipcontact-sounds-paola-1.0.5-1.0.centos5.src.rpm
location_href: ipcontact-sounds-paola-1.0.5-1.0.centos5.noarch.rpm
checksum_type: sha
description:
  This package include sound files needed to run the IPContact system applications
  on top of Asterisk PBX. Recorded with Paola Sciarra's voice.


pkgId: bac226845f8fb339a0db69ffc2b891fa7422424f
name: ipcontact-twinstar-config
arch: noarch
version: 1.01
epoch: 0
release: 2.0.centos5
summary: IPContact Twinstar(tm) config scripts
url: http://www.xorcom.com/
rpm_license: GPLv2
rpm_group: Applications/Internet
rpm_buildhost: centos64
rpm_sourcerpm: ipcontact-twinstar-config-1.01-2.0.centos5.src.rpm
location_href: ipcontact-twinstar-config-1.01-2.0.centos5.noarch.rpm
checksum_type: sha
description:
  Automatic failover system for Asterisk server and telephony interfaces, based on Astribank and two identical Asterisk servers.


pkgId: c2804a32dc1a2f8266b2c7cfe92690b1ee6b0579
name: ipsupervisor-plugins-debuginfo
arch: x86_64
version: 1.1
epoch: 0
release: 1.0.centos5
summary: Debug information for package ipsupervisor-plugins
url: http://repo.ipcontact.com.uy/pub/centos
rpm_license: GPL
rpm_vendor: IPContact Software SRL
rpm_group: Development/Debug
rpm_buildhost: vmcentos5_64
rpm_sourcerpm: ipsupervisor-plugins-1.1-1.0.centos5.src.rpm
rpm_packager: Daniel Ferrer <daniel@teledata.com.uy>
location_href: ipsupervisor-plugins-debuginfo-1.1-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package provides debug information for package ipsupervisor-plugins.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: d2ebc5719d41629c3faf42701ca8f60ba410dc6b
name: libopenr2
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.0.centos5
summary: MFC/R2 call setup library
url: http://www.libopenr2.org/
rpm_license: LGPL
rpm_group: System Environment/Libraries
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: libopenr2-1.3.1-1.0.centos5.src.rpm
rpm_packager: Daniel Ferrer <daniel@ipcontact.com.uy>
location_href: libopenr2-1.3.1-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  OpenR2 is a library that implements the MFC/R2 signalling over E1 lines using
  the Zapata Telephony interface. The MF R2 tones required for the signaling are
  generated by code borrowed from the LGPL library SpanDSP written by Steve Underwood,
  the user has the option to provide a MF interface to use his own MF R2 tone generation
  and detection so the library will use them when needed, that's why this library does not
  depend directly on spandsp, libteletone or zaptel for tone generation and detection
  (depends on zaptel for ABCD bits and general media transmission though)


pkgId: 5c271b928ca92eda1b7a2899548a06832d71095c
name: libopenr2-devel
arch: x86_64
version: 1.3.1
epoch: 0
release: 1.0.centos5
summary: Development files for libopenr2
url: http://www.libopenr2.org/
rpm_license: LGPL
rpm_group: Development/Libraries
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: libopenr2-1.3.1-1.0.centos5.src.rpm
rpm_packager: Daniel Ferrer <daniel@ipcontact.com.uy>
location_href: libopenr2-devel-1.3.1-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  The libopenr2-devel package contains libraries and header files for
  developing applications that use libopenr2.


pkgId: 8c737588570fb1eb00ad8a01c2ec8ef46b2129bf
name: libosptk
arch: x86_64
version: 3.4.2
epoch: 0
release: 2.0.centos5
summary: The OSP Toolkit(tm) shared library
url: http://sourceforge.net/projects/osp-toolkit
rpm_license: BSD-like
rpm_group: System/Libraries
rpm_buildhost: centos-x8664
rpm_sourcerpm: osptoolkit-3.4.2-2.0.centos5.src.rpm
location_href: libosptk-3.4.2-2.0.centos5.x86_64.rpm
checksum_type: sha
description:
  The OSP Toolkit is a complete development kit for software developers who want
  to implement the client side of the European Telecommunication Standards
  Institute's (ETSI) Open Settlement Protocol. The OSP Toolkit includes source
  code written in ANSI C, test tools and extensive documentation on how to
  implement OSP. A hosted OSP test server is freely available on the Internet for
  all developers to test their OSP implementation.


pkgId: f23cbc9c9ef56b500ce33481b396b26d959f1e59
name: libosptk-devel
arch: x86_64
version: 3.4.2
epoch: 0
release: 2.0.centos5
summary: Static library and header files for the libosp library
url: http://sourceforge.net/projects/osp-toolkit
rpm_license: BSD-like
rpm_group: Development/C
rpm_buildhost: centos-x8664
rpm_sourcerpm: osptoolkit-3.4.2-2.0.centos5.src.rpm
location_href: libosptk-devel-3.4.2-2.0.centos5.x86_64.rpm
checksum_type: sha
description:
  The OSP Toolkit is a complete development kit for software developers who want
  to implement the client side of the European Telecommunication Standards
  Institute's (ETSI) Open Settlement Protocol. The OSP Toolkit includes source
  code written in ANSI C, test tools and extensive documentation on how to
  implement OSP. A hosted OSP test server is freely available on the Internet for
  all developers to test their OSP implementation.

  This package contains the static libosp library and its header files.


pkgId: c110f4ea2c58c7a6bbe9073985aab4515e3acfde
name: libpri
arch: x86_64
version: 1.4.12
epoch: 0
release: 1.0.centos5
summary: Libpri, an open source implementation of Primary Rate ISDN (PRI)
url: http://dowloads.asterisk.org/libpri/
rpm_license: GPLv2
rpm_vendor: IPContact Software S.R.L.
rpm_group: System Environment/Libraries
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: libpri-1.4.12-1.0.centos5.src.rpm
rpm_packager: Daniel Ferrer <daniel@ipcontact.com.uy>
location_href: libpri-1.4.12-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  libpri is a C implementation of the Primary Rate ISDN specification.
  It was based on the Bellcore specification SR-NWT-002343 for National
  ISDN.  As of May 12, 2001, it has been tested work with NI-2, Nortel
  DMS-100, and Lucent 5E Custom protocols on switches from Nortel and
  Lucent.


pkgId: 7416efb515e1744265a35c35d32331b1895ab044
name: libpri-devel
arch: x86_64
version: 1.4.12
epoch: 0
release: 1.0.centos5
summary: Development files for libpri
url: http://dowloads.asterisk.org/libpri/
rpm_license: GPLv2
rpm_vendor: IPContact Software S.R.L.
rpm_group: Development/Libraries
rpm_buildhost: centos64.ipcontact.com.uy
rpm_sourcerpm: libpri-1.4.12-1.0.centos5.src.rpm
rpm_packager: Daniel Ferrer <daniel@ipcontact.com.uy>
location_href: libpri-devel-1.4.12-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package contains all of the development files that you will
  need in order to compile libpri applications.


pkgId: 76a1c4e517a91b2a940afa367cba9857b42414c9
name: mISDNuser
arch: x86_64
version: 1.1.8
epoch: 0
release: 2.1.centos5
summary: mISDNuser libraries
url: http://www.misdn.org
rpm_license: LGPLv2
rpm_group: System Environment/Libraries
rpm_buildhost: centos-x8664
rpm_sourcerpm: mISDNuser-1.1.8-2.1.centos5.src.rpm
rpm_packager: VoIP Consulting <vc-rpms@voipconsulting.nl>
location_href: mISDNuser-1.1.8-2.1.centos5.x86_64.rpm
checksum_type: sha
description:
  mISDN (modular ISDN) is intended to be the new ISDN stack for the
  Linux 2.6 kernel, from the maintainer of the existing isdn4linux
  code.
  This package contains the userspace libraries required to interface
  to mISDN.


pkgId: 45c4c1f016d3c95973fa799b0aa601804b0cb410
name: mISDNuser-devel
arch: x86_64
version: 1.1.8
epoch: 0
release: 2.1.centos5
summary: Development files Modular ISDN stack
url: http://www.misdn.org
rpm_license: LGPLv2
rpm_group: System Environment/Libraries
rpm_buildhost: centos-x8664
rpm_sourcerpm: mISDNuser-1.1.8-2.1.centos5.src.rpm
rpm_packager: VoIP Consulting <vc-rpms@voipconsulting.nl>
location_href: mISDNuser-devel-1.1.8-2.1.centos5.x86_64.rpm
checksum_type: sha
description:
  This package contains the development files for userspace
  libraries required to interface to mISDN, needed for compiling
  applications which use mISDN directly such as OpenPBX or Asterisk.


pkgId: eb7079e2b1211aec0d2a4e8a8ea6efcf267569b1
name: openh323
arch: x86_64
version: 1.18.0
epoch: 0
release: 10.0.centos5
summary: OpenH323 Library
url: http://www.openh323.org/
rpm_license: MPL
rpm_group: System/Libraries
rpm_buildhost: vmcentos_x8664
rpm_sourcerpm: openh323-1.18.0-10.0.centos5.src.rpm
location_href: openh323-1.18.0-10.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This is an open source class library for the development of
  applications that wish to use the H.323 protocol for multi-media
  communications over packet based networks.

  The OpenH323 project aims to create a full featured, interoperable,
  Open Source implementation of the ITU H.323 teleconferencing protocol
  that can be used by personal developers and commercial users without
  charge.


pkgId: 7515eea4459adee904cafd0f9f4301fcc88ac5d3
name: oslec
arch: x86_64
version: 0.3
epoch: 0
release: 1.0.centos5
summary: OSLEC - Open Source Line Echo Canceller
url: http://www.rowetel.com
rpm_license: GPLv2
rpm_group: System Environment/Kernel
rpm_buildhost: vmcentos_x8664
rpm_sourcerpm: oslec-0.3-1.0.centos5.src.rpm
rpm_packager: IPContact Software <ipcontact@ipcontact.com.uy>
location_href: oslec-0.3-1.0.centos5.x86_64.rpm
checksum_type: sha
description:
  OSLEC is an open source high performance line echo canceller. When used with
  Asterisk it works well on lines where the built-in Zaptel echo canceller fails.
  No tweaks like rxgain/txgain or fxotrain are required. OSLEC is supplied as GPL
  licensed C source code and is free as in speech.

  OSLEC partially complies with the G168 standard and runs in real time on x86
  and Blackfin platforms. Patches exist to allow any Zaptel compatible hardware
  to use OSLEC. It has been successfully tested on analog and PRI x86 hardware
  (e.g. TDM400, X100P, Sangoma A104 etc) and on the IP04 embedded Asterisk
  platform.

  The oslec Interface drivers is contained in the dkms-oslec package.


pkgId: f07ea58e099f2ebe73ed46de5d0657fb8cb2f47c
name: pwlib
arch: x86_64
version: 1.10.10
epoch: 0
release: 9.0.centos5
summary: Portable Windows Library
url: http://www.openh323.org/
rpm_license: MPL
rpm_group: System Environment/Libraries
rpm_buildhost: vmcentos_x8664
rpm_sourcerpm: pwlib-1.10.10-9.0.centos5.src.rpm
location_href: pwlib-1.10.10-9.0.centos5.x86_64.rpm
checksum_type: sha
description:
  PWLib is a moderately large class library that has its genesis many
  years ago as a method to produce applications to run on both Microsoft
  Windows and Unix X-Window systems. It also was to have a Macintosh
  port as well but this never eventuated. This version does not contain
  any UI code.

  It is supplied mainly to support the open H323 project, but that shouldn't stop
  you from using it in whatever project you have in mind if you so desire.


pkgId: 2d89e6000bb0981b251d4598867e4a1adb564c52
name: spandsp
arch: x86_64
version: 0.0.6
epoch: 0
release: 0.pre12.1.centos5
summary: SpanDSP library of DSP functions for telephony spans.
url: http://www.soft-switch.org/
rpm_license: GPLv2
rpm_group: System Environment/Libraries
rpm_buildhost: vmcentos_x8664
rpm_sourcerpm: spandsp-0.0.6-0.pre12.1.centos5.src.rpm
rpm_packager: IPContact Software <ipcontact@ipcontact.com.uy>
location_href: spandsp-0.0.6-0.pre12.1.centos5.x86_64.rpm
checksum_type: sha
description:
  SpanDSP is a library of DSP functions for telephony, in the 8000
  sample per second world of E1s, T1s, and higher order PCM channels. It
  contains low level functions, such as basic filters. It also contains
  higher level functions, such as cadenced supervisory tone detection,
  and a complete software FAX machine. The software has been designed to
  avoid intellectual property issues, using mature techniques where all
  relevant patents have expired.
  See the file DueDiligence for important information about these
  intellectual property issues.


pkgId: a96c7897f93f0524c26eb75a230ec0c1d43d363f
name: uw-imap
arch: x86_64
version: 2007b
epoch: 0
release: 3.0.centos5
summary: UW Server daemons for IMAP and POP network mail protocols
url: http://www.washington.edu/imap/
rpm_license: ASL 2.0
rpm_group: System Environment/Daemons
rpm_buildhost: centos-x8664
rpm_sourcerpm: uw-imap-2007b-3.0.centos5.src.rpm
location_href: uw-imap-2007b-3.0.centos5.x86_64.rpm
checksum_type: sha
description:
  The uw-imap package provides UW server daemons for both the IMAP (Internet
  Message Access Protocol) and POP (Post Office Protocol) mail access
  protocols.  The POP protocol uses a "post office" machine to collect
  mail for users and allows users to download their mail to their local
  machine for reading. The IMAP protocol allows a user to read mail on a
  remote machine without downloading it to their local machine.


pkgId: 34bb157aa6818e9989f0064815392847bd6dab61
name: uw-imap-devel
arch: x86_64
version: 2007b
epoch: 0
release: 3.0.centos5
summary: Development tools for programs which will use the UW IMAP library
url: http://www.washington.edu/imap/
rpm_license: ASL 2.0
rpm_group: Development/Libraries
rpm_buildhost: centos-x8664
rpm_sourcerpm: uw-imap-2007b-3.0.centos5.src.rpm
location_href: uw-imap-devel-2007b-3.0.centos5.x86_64.rpm
checksum_type: sha
description:
  Contains the header files and libraries for developing programs
  which will use the UW C-client common API.


pkgId: 9d94e5550ec4e54a0b5ae029c49acb7d8b13a25e
name: uw-imap-utils
arch: x86_64
version: 2007b
epoch: 0
release: 3.0.centos5
summary: UW IMAP Utilities to make managing your email simpler
url: http://www.washington.edu/imap/
rpm_license: ASL 2.0
rpm_group: Applications/System
rpm_buildhost: centos-x8664
rpm_sourcerpm: uw-imap-2007b-3.0.centos5.src.rpm
location_href: uw-imap-utils-2007b-3.0.centos5.x86_64.rpm
checksum_type: sha
description:
  This package contains some utilities for managing UW IMAP email,including:
  * dmail : procmail Mail Delivery Module
  * mailutil : mail utility program
  * mtest : C client test program
  * tmail : Mail Delivery Module
  * mlock


